This document is well-written, and clear. Thanks to the authors. I have some comments and questions below, please check.

BTW, it looks like we have 7 authors now, you might need to address this.

Questions:
1. 
Section 2.1
However, each PCEP Label Switched Path (LSP) can contain only a single ERO, which prevents the encoding of multiple Segment Lists within the same SR Candidate Path.

[Cheng]I do not understand the logic of this sentence and the previous sentence.one single ERO,presnets the encoding of multiple SL?

2.
Section 3.4
This functionality is not part of the SR Policy Architecture [RFC9256], but is something optional that may be implemented for certain specialized use cases. One such use case is the Point-to-Multipoint (P2MP) SR Policy [I-D.draft-ietf-pce-sr-p2mp-policy].
[Cheng]I can understand this TLV is used for backup. But how this is used for multicast? The traffic will be copied N times and forward to each path?

3
Section 3.5 
Length (16 bits): 16. 

[3].Suggest to clarify more, to describe the length. 16 is not clear to me. From the figure, it is a 12 bytes TLV.
Please also clarify the length field in other TLVs, same problem. Thank you.


Nits：
1.
Certain traffic engineering path computation problems require solutions that consist of multiple traffic paths that together form a solution. Returning a single traffic path does not provide a valid solution.

[Cheng]
__New__
Certain traffic engineering path computation problems require solutions that consist of multiple traffic paths that together form a solution. However, current PCEP extension can only return a single traffic path, which can not meet the requirements.

2.
The new Path Computation Element Communication Protocol (PCEP) mechanisms are designed to be generic, where possible, to allow for future re-use outside of SR Policy.

[Cheng]
__NEW__
The new Path Computation Element Communication Protocol (PCEP) mechanisms are designed to be generic, which allows for future re-use outside of SR Policy.

3.
The fraction of flows a specific ERO/RRO carries is derived from the ratio of its weight to the sum of the weights of all other paths. ？
[Cheng]The fraction of flows _that_ a ? 

4.
B: If set, indicates a pure backup path. 
[Cheng]what is the definition of 'pure backup path?'